Creality3D CR - 10 3D Drucker
Teilen mit:

Creality3D CR - 10 3D Drucker

- BLAU EU STECKER 212296802

Desktop DIY Maschine
339.99 $450 Rabatt: 24% OFF
;   
Steuerinfo Preissicherheit Preis-Haftungsausschluss 1 Jahr Reparaturgarantie Artikel berichten
Ausverkauf

Empfohlene Produkte für Sie:

Kunden, die diesen Artikel gekauft haben, kauften auch

Haftungsausschluss:

● Bitte lesen und befolgen Sie die Bedienungsanleitung sorgfältig, bevor Sie den 3D Drucker montieren oder bedienen.

● Änderungen und Anpassungen des 3D Druckers sind strengstens untersagt. Wir übernehmen keine Verantwortung für Probleme, die sich aus Änderungen ergeben.

● Verwenden Sie immer die richtige Wechselspannung für Ihre Region.

● Stellen Sie den 3D Drucker nicht in der Nähe von entflammbaren / brennbaren Materialien oder Wärmequellen auf.

● Verwenden Sie den 3D Drucker nur in gut belüfteten Bereichen. Halten Sie einen Sicherheitsabstand zum Drucker ein.


CR - 10 3D Desktop Drucker LCD Display mit SD Karte Off-Line Druckfunktion


Beschreibung:

Der 3D-Drucker CR-10 ist ein 3D Drucker mit dem importiertem Spezialrahmen aus Aluminium. Es verfügt über super große 300 x 300 x 400 mm Bauvolumen, Standard 0,4 mm Düsendurchmesser (kann bis 0,3 / 0,2 mm ersetzt werden). Um den handwerklichen Charme und die handgefertigten Reize zu erhalten, ist der CR-10 3D-Desktopdrucker auch ein Bausatz, der Ihnen eine unvergessliche Lernerfahrung für den 3D-Drucker bietet.


Haupteigenschaften:

● Mit LCD-Bildschirm und Tastatur zur einfachen Offline-Nutzung

● Unterstützt SD-Karte Offline-Druck, kann auch direkt mit USB-Adapter drucken

● 300 x 300 x 400 mm Bauvolumen, genau das Richtige für Sie

● Unterstützt mehrere 3D-Druck Filamente: ABS / PLA / TPU und so weiter

● Weitere vereinfachte Struktur bedeutet schnelle Montage und einfache Einstellung, die Ihnen Zeit und Energie spart

● Verbesserte Stabilität und Zuverlässigkeit: Aluminiumplatte sorgt für einen stabileren Druck

● Die Montage ist einfach und für DIY-Kunden geeignet

● Es ist ein nicht zusammengebautes Bausatz, der Ihnen eine unvergessliche Schritt-für-Schritt-Lernerfahrung für den 3D-Drucker von Grund auf bietet. Solange Sie eine Leidenschaft für Kreativität haben, können Sie es sich nicht leisten, dieses Produkt zu verpassen

● Düsentemperatur: unter 250 ° C im Normalzustand, max. 270 ° C

● Mit den Funktionen zum Ausbrechen der Filamenterkennung und Fortsetzen des Druckens, wenn der Ausschaltzustand wiederhergestellt wird (nur für die aktualisierte Version)

● Hinweis: Sie können hierklicken, um eine andere Farbe auszuwählen


Driver Download:Klick hier 

Vermessung und Gewicht

Daten

Marke: Creality3D
Typ: DIY
Modell: CR - 10
Düsendurchmesser: 0,4mm
Speicherkarte offline drucken: SD-Karte
LCD-Bildschirm: Ja
Druckgeschwindigkeit: 150mm / s
Materialdurchmesser: 1,75mm
Datei Format: G-Code,JPG,OBJ,STL
Host-Computer-Software: Cura
Produktgewicht: unbestückt Verpackung

Abmessungen

Produktgewicht: 13,0000 kg
Verpackungsgewicht: 14,0000 kg
Produktgröße: 61,50 x 60,00 x 49,00 cm / 24,21 x 23,62 x 19,29 Zoll
Verpackungsgröße: 64,00 x 53,00 x 27,00 cm / 25,2 x 20,87 x 10,63 Zoll

Verpackungsinhalt

Verpackungsinhalt: 1 x CR - 10 3D Desktop DIY Drucker Bausatz

Creality3D CR - 10 3D Drucker- Blue EU Plug

Creality3D CR - 10 3D Drucker- Blue EU Plug

Creality3D CR - 10 3D Drucker- Blue EU Plug

Creality3D CR - 10 3D Drucker- Blue EU Plug

Creality3D CR - 10 3D Drucker- Blue EU Plug

Creality3D CR - 10 3D Drucker- Blue EU Plug

Creality3D CR - 10 3D Drucker- Blue EU Plug

Creality3D CR - 10 3D Drucker- Blue EU Plug


Das könnte Ihnen gefallen

Kundenrezensionen

4.71 von 5 Sterne
  • 184
  • 44
  • 2
  • 0
  • 5
Alle 235 Bewertungen anzeigen Eine Rezension schreiben
  • Chris Durkin
    cdurkinz
    -Very good quality prints -Prints in most filaments -Everything is very high quality, heavy, metal, very skookam. -Chooches like the best of them! -Super quick and easy to assemble. -Some extra parts even -I've only just started but this seems to be one of the easier printers to upgrade quite a bit -Included micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc. Some incorrect things that GearBest answered when people have asked in the questions section, that I would like to clear up, I just hope those same people see this review. -It DOES come with a glass bed top ontop of the aluminum heated bed base. -It DOES come with a little PLA filament. It's not a ton but it's quite a bit to get you started, I've printed 4 or 5 things so far and I haven't even put a dent in it. -I believe the extruder in this is an MK8 Finally on to shipping. I'm somewhat happy to say that this is the fastest I've ever received something from China. Usually things take 2-3 weeks or more but this arrived in 10 days from China to Central US (Northern IL). The one weird thing and I'm guessing something went wrong was that when I ordered it I chose expedited shipping, and DHL EXT. It was NOT clear what DHL EXT is or what half of the shipping options mean, but I can say that my package started in China using China Post and was delivered to my door using USPS, the entire time I had a USPS tracking number to track it. Now when I ordered and chose DHL EXT there was NO added shipping cost even though it said expedited, which I found interesting because I'm fairly certain expedited shipping from China would cost a few bucks. So I figure maybe this "DHL EXT" isn't for shipping to the US and so they just sent it through USPS. But I can't say for sure.
    Vorschlag
    -Not really a con but either it is tested before they ship it or I got one that someone returned and they fixed it or something. -Sticker on fan peeling off -A coupler's set-screws on the Y-axis stepper motor weren't affixed correctly, easy fix though so again not really a con. Plus I've read that some people have has those couplers snap in shipping so I figured this may have been done on purpose. The issue I had was when I went to tighten the set-screws they went all the way through and fell into the middle of the coupler. No big deal I had to loosen all the set screws and move things around to get them out and realized I had to move the coupler up a little bit for it to connect the Y-axis threaded pole and the stepper motor. Just an FYI

    Oct 04,2017 01:47:00

  • Daniele
    Architetto
    La stampante CR-10 è una buona stampante che ha un ottimo rapporto prezzo-prestazione. E' facile da montare anche dai meno esperti; di fatto c'è da unire i due pezzi principali, stringere le viti e collegare i fili x, y, z nella giusta posizione e poi non resta che partire per la prima stampa di prova. Come “tradizione” NON STAMPATE il file g-code del Gatto... è corrotto e dopo due ore di stampa va fuori centro ed è tutto da buttare! Scaricate da internet uno dei tanti files di prova e provate con quelli; a me ha funzionato molto bene il Robot di Ultimaker. Per stampare in PLA non è necessario scaldare il piatto, occorre solo il nastro per dare aderenza. Occorre fare una buona calibrazione, che con un piatto di così grandi dimensioni non è semplicissima anche se, una volta fatta, viene mantenuta a lungo. Il problema maggiore nella calibrazione del piatto è che se vanno bene gli angoli al centro la testina di stampa o è troppo vicina e raschia la superficie o è troppo lontana e il layer non aderisce bene... Ciò è probabilmente dovuto al fatto che il piano in vetro non è perfettamente piano ma tende ad alzarsi o abbassarsi al centro. Consiglio quindi, dato che le stampe non saranno sempre alla massima dimensione, di calibrare il piatto sulla parte centrale più utilizzata per stampe con la base fino a 18x18 cm, ed utilizzare tutti i 40 cm di altezza. Consiglio questa stampante, soprattutto se è la vostra prima stampante 3D dove poter sperimentare ed imparare i trucchi per una buona stampa.
    Vorschlag
    E' poco curata la documentazione fornita. La scheda fornita dovrebbe avere un maggior numero di files STL di esempio ed alcuni GCODE perfetti con le indicazioni dei parametri di slicing in modo da fare subito delle prove e verifiche. Sarebbe necessario anche avere da subito CURA nella versione più aggiornata, senza dover andare a scaricarla da internet.

    Dec 05,2017 17:25:34

  • Fredrik Stahre
    Software Engineer
    The printer works well and gives good prints. I'm new to 3D printing so I can't really compare to anything else except youtube clips from other printers. One thing I have notices is that the cat print (even though it didn't print the head) included gets printed in super awesome quality and prints I've gotten of Thingiverse and sliced with Cura does not reach that quality, I guess it has to do with settings in Cura and maybe the details of the 3D files. The quality is very nice anyway though, so no real complaint, just an observation. It takes some skills to do the right settings when slicing. My machine was not actually working ok when I first started it up. The temperature measurements were resetting randomly and resulted in Low Temp errors. I found that the problem is because the cable that goes to the to the nozzle, fans etc is glitchy, when I move the cable it looses connection. I've temporarily solved it by disassembling the connector on to the main unit and bent the cables a bit but it's not a long term solution. I will ask GearBest if the can send a new cable. Overall, for the price, this printer is very good so far and it was easy to assemble. If it hadn't been for that glitch in the cable it would have been super easy. Still, not recommended if you are looking for a Plug and Play experience, you need to watch some you tube vids, read some instructions and be ready to experiment a bit before you get nice prints.
    Vorschlag
    Bed levelling is a bit fiddly and I think it doesn't get exactly levelled. Mine is level in the corners but it's sagging down 0.1-0.2mm in the middle. I've solved it by levelling without tape in the corners and then printing on one layer of tape to get the middle part up 0.1 mm. I'm not sure how this will work for really big prints that goes all the way out to the edges though, the nozzle might come to close to the glass. I've yet to try any of the more advanced solutions with wedges under the bed. For now it works just fine with a layer of tape. Could use some more instructions on how to get started with setup and printing. How to get prints to stick to the bed and so on.

    Aug 04,2017 12:55:52

  • T (engineering student)
    Just received 9/15/18
    Took about about 10 days to get from China to Northern California. Got the printer set-up and printing in about an hour. The settings on the cat file that comes on the SD aren't great, had to lower nozzle temp to 192 and raise bed temp to 60. Still working on first complete print (PSU box legs) and notice a lot of stringing, which is likely due to settings (retraction probably). Okay, quality control issues.1. Y-axis belt tensioner bracket was bent causing belt to ride on one side of the pulleys and twist. 2. Bracket holding y-axis stepper motor is bent and causing same issue as the other end. These are very simple things to fix, which will happen after the current print is done. 3. They did not debur and clean up the metal from the holes being drilled in the frame. Easy thing to clean up, but it probably shouldn't be there. 4. Glass bed is warped. Everyone already knows about this, and I'm sure they are aware. Hope they fix this sooner than later. 5. Hot end heat sink not screwed in on one side and is sitting cockeyed. Noticed it during current print, I think all it needs to be tightened down. I hope they didn't mess something up and then leave it like that. I'll update later. Packaging was A+ great. Box was not beat up in shipping. Instruction manual is good enough.For the price (compared to amazon/others) it seems like this is a great deal.

    Sep 16,2018 04:38:30

  • Creality CR-10S Unboxing and Setup
    Creality CR-10S Unboxing and Setup
    The Creality3D CR - 10S 3D Desktop DIY Printer was a very simple and easy to build 3D printer that has very good print results. Highly recommend if you are in the market for a 3D printer that is low budget with good quality print output. Building the printer was very easy from start to finish. Very little skill was needed as a lot of the build was already done. Unbelievable 3D printer. Well worth the moneyVery good quality printsPrints in most filamentsEverything is very high qualitySuper quick and easy to assemble.Some extra parts evenI've only just started but this seems to be one of the easier printers to upgrade quite a bitIncluded micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc.Check out my unboxing and build video https://www.youtube.com/watch?v=jDU3mpXYGyc&t=33s
    Vorschlag
    A few loose bolts found on the assembled parts so check when you are building yours. These may have been left loose for transport. At this time there are no real cons as every thing was easily assembled and worked perfect from the start

    Jun 25,2018 10:31:03

  • 3DPMaster
    New 3D Printer Creality CR-10s
    The new Creality3D CR-10s is amazing! I love it!Well packaged, easy to assemble, easy to use with SD card or with CURA (version 3.4.1 or greater) plugged into usb, ALMOST NO UPGRADE NEEDED to get started, really good for beginner to PRO.Apart from the printer itself and filament (CCTREE BLACK is recommended) what do you need to get started quickly?- 2 x NEMA 17 dampers to put between the X and Y servo-motors- 4 x 2 dots yellow squash balls (using them with Squash Feet, see thingiverse to get the stl )- 1 x Quiet Hot End Fan (ref. Noctua 40x10mm Fan 12v NF-A4x10 FLX) - 1 x 300x300mm mirror for bed replace the stock glass with a simple mirror, see the video for more info https://www.youtube.com/watch?v=Kj4Xz3DwGSQ use this mirror at 70° heat-bed and all objects will stick perfectly without any additional product (no glue, no blue tape, no spray, nothing!)that's it!you printer will be quiet enough and ready for production!Hope this helps!

    Sep 01,2018 06:08:40

  • Markus
    Supertoller Drucker! Würde ihn wieder kaufen!
    Mein erster 3D-Drucker - und ich muss sagen, nach diversen Startschwierigkeiten - man muss sich erst mal so richtig in die 3D-Drucker-Welt einlesen - klappt das ganze sehr gut.Die Firmware habe ich jedoch mittlerweile auf eine inoffizielle Marlin-Version 1.1.9 geupdatet, da mit der bestehenden trotz erweitertem ABL-Sensor der Sensor hinten und vorne nicht funktioniert. Aktuell drucke ich wieder ohne ABL-Sensor.Der ABL-Sensor war direkt von Creality, löst jedoch leider aktuell noch sehr ungenau aus. Werde ich später nochmals genauer prüfen, da andere mit dem Creality-Sensor (mittlerweile) bestens Drucken können.Ansonsten nach 9 Monaten immernoch dieselbe Nozzle, keinerlei Probleme. Glas-Platte habe ich allerdings gegen eine Carbon-Platte ausgetauscht, da mir die Aktion mit dem Krepp-Band auf Dauer zu umständlich war.Auch habe ich die Leveling-Wheels durch die Großen ausgetauscht und die Federn durch Silikon-Bumper, da diese sich nicht so schnell "verstellen".Octopi noch angeschlossen und prima ist das Ganze.

    Nov 13,2018 20:28:15

  • Jeremy
    Une imprimante 3D extraordinaire
    Commandée pour 305€, je l'ai reçue à la maison seulement une semaine après. J'ai ouvert le carton, déballé les pièces et en 15 minutes, tout était monté, prêt à fonctionner. Il suffit de visser la partie verticale sur la base, brancher les câbles sur la station de contrôle, contrôler les serrages des visses, et c'est parti. De plus, elle est fournie avec une bobine de filament PLA, ce qui permet de la tester tout de suite, et de réaliser ces premières impressions. La qualité des matériaux de la Créality CR10 fait qu'il y a très peu de jeu entre les pièces, et par conséquent les impressions sont d'une très bonne qualité. Le menu (en Anglais) du boitier de contrôle est simple et se prend vite en main. Si demain je devais renouveler mon achat, c'est sans hésitation que je choisirais la créality CR10 à nouveau.
    Vorschlag
    La seule petite amélioration à prévoir pour cette imprimante est une vitre de meilleur qualité. Celle ci est légèrement bombée au milieu.

    May 19,2018 09:08:17

  • Peter Homer
    Mr
    The Creality3D CR - 10S 3D Desktop DIY Printer was a very simple and easy to build 3D printer that has very good print results. Highly recommend if you are in the market for a 3D printer that is low budget with good quality print output. Building the printer was very easy from start to finish. Very little skill was needed as a lot of the build was already done. I am unable to find any cons at this time I am happy to say Unbelievable 3D printer. Well worth the money Check out my unboxing and build video https://www.youtube.com/watch?v=uNy7qAQY7cA
    Vorschlag
    A few loose bolts found on the assembled parts so check when you are building yours. These may have been left loose for transport. At this time there are no real cons as every thing was easily assembled and worked perfect from the start

    Mar 10,2018 05:46:28

  • JimiDJ
    Creality3D CR-10S as first printer
    My first 3D Printer, bought after so many hours of watching youtube videos about 3D printing and this printer specifically, since it was my first one i struggled a little 2 hours but really worth, for my first print i printed the cat in SD with the white filament that came with it, the quality was AMAZING! (even though it took 3:30 hours to print), i also tested some 3D benchy boats as a newbie, changing the settings to each one in order to learn something, now i suppose only it's durability test in time remain... but as i saw on youtube some people have this printer for over a year and still no problem after all.

    Aug 27,2018 13:25:42

Kundenfragen & Antworten

  • Alle
  • Produktinformationen
  • Lagerbestand
  • Zahlung
  • Über den Versand
  • Anderer Grund

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

0 Fragen & Beantwortungen Alle ansehen

Empfehlung ähnlicher Produkte wie dieses

Ihre zuletzt angesehenen Artikel

Persönliche Empfehlungen einsehen

Neuer Kunde? Hier starten