Alles
Produkt-Stichwörter
Bitte geben Sie Ihre E-Mail Adresse ein
Metall Getriebe 2 Sätze
Teilen mit:

Metall Getriebe 2 Sätze

- Orange Gold
262406501

für WLtoys 12428/12428 - A / 12428 - B / 12428 - C / 12423 RC Auto
4.86 37 Kundenrezensionen | Siehen Sie die englische Beschreibung
10.83
  • VERSANDKOSTENFREI
    COD Dieses Produkt unterstützt Nachnahme bei Lieferung. Vorschläge: Geben Sie keine Bestellungen mit Nicht-Nachnahme-Produkten auf. Andernfalls können Sie die Zahlungsart Nachnahme nicht auswählen.
    Versand zwischen: Oct 23 - Oct 25, Voraussichtliche Lieferzeit: Werktage Die Bearbeitungszeit der Bestellung kann einige Tage dauern. Nach dem Versand aus dem Lager hängt die Versandzeit von der Versandmethode ab.
  • +
  • zinsfrei Sie können maximal 0 Mal die Teilzahlung zinsfrei genießen. Möglicherweise kann dieses Angebot bei Bestellungen mit andren Produkten nicht genutzt werden.
;   
Steuerinfo Preissicherheit Preis-Haftungsausschluss 1 Jahr Reparaturgarantie Artikel berichten
Ausverkauf

Empfohlene Produkte für Sie:

Kunden, die diesen Artikel gekauft haben, kauften auch


Haupteigenschaften:

● Hochwertiges Metall Material, langlebig und rostgeschützt

● 2 Zahnräder

● Passt für WLtoys RC-Wagen 12428/12428 - A / 12428 - B / 12428 - C / 12423

Vermessung und Gewicht

Daten

Typ: Gang
Kompatibel mit: WLtoys 12428/12428 - A / 12428 - B / 12428 - C / 12423 RC Auto

Abmessungen

Produktgewicht: 0,0300 kg
Verpackungsgewicht: 0,0500 kg
Verpackungsgröße (L x W x H): 14,00 x 10,00 x 4,00 cm / 5,51 x 3,94 x 1,57 Zoll

Verpackungsinhalt

Verpackungsinhalt: 2 x 12T Treiber Getriebe, 2 x 30T Differentialgetriebe, 4 x 24T Differential Planetengetriebe, 8 x 12T Differential Asteroidengetriebe

Metall Getriebe 2 Sätze- Orange Gold

Metall Getriebe 2 Sätze- Orange Gold

Metall Getriebe 2 Sätze- Orange Gold

Metall Getriebe 2 Sätze- Orange Gold

Metall Getriebe 2 Sätze- Orange Gold


Das könnte Ihnen gefallen

Kundenrezensionen

4.86 von 5 Sterne
  • 34
  • 1
  • 2
  • 0
  • 0
Alle 37 Bewertungen anzeigen Eine Rezension schreiben
  • RENAN
    As engrenagens são moldadas e cortadas bem, mas com um leve descuido
    As engrenagens são bem cortadas e são moldadas muito bem em latão. Não há cavidades / bolhas como você pode encontrar na fundição de latão para uma torneira de jardim. Eles se movem suavemente um contra o outro e ficam em silêncio com alguma graxa automotiva de PTFE. No entanto, isso é com os parafusos desfeitos e apenas segurando as peças juntas à mão. Devido ao problema de encadernação descrito abaixo, há ruído audível alto durante a operação do caminhão. As engrenagens de nylon originais provavelmente tiveram o mesmo problema e desgastaram por causa disso, e é apenas mais perceptível por causa da dureza do bronze.
    Vorschlag
    A espessura é um pouco alta demais em todas as partes, pois eu tive que deixar os parafusos no centro do diferencial e o revestimento do diferencial bem solto para evitar a ligação das engrenagens, e mesmo com os parafusos tão soltos quanto possível, há um pouca ligação. Eu recomendo pegar algumas minúsculas arruelas para permitir espaço no centro do diferencial, e talvez arquivar a parte de trás do pinhão de entrada para baixo para que ele se encaixe perfeitamente. Os parafusos para segurar as engrenagens para os meio-eixos esquerdo e direito não são embebidos como as engrenagens de nylon originais. Isso faz com que as cabeças dos parafusos fiquem orgulhosas da engrenagem, mas ainda há folga suficiente para que elas não toquem nos pinos que as engrenagens de aranha ligam.

    Jul 11,2018

  • James
    The gears are cast and cut well, but with one slight oversight.
    The gears are cut well, and are cast very nicely in brass. No cavities/bubbles like you might find in the brass casting for a garden tap. They smoothly turn against each other and are silent with some automotive PTFE grease. However that is with the screws undone and just holding parts together by hand. Due to the binding issue described below, there is loud audible noise while running the truck. The original nylon gears probably had the same issue and wore out because of it, and it's just more noticeable because of the hardness of brass.
    Vorschlag
    The thickness is a little too high on all parts, as I had to leave the screws on the diff centre and diff casing rather loose to avoid the gears binding, and even with the screws as loose as I can reasonably leave them, there is a little binding. I recommend getting some tiny washers to allow space in the diff centre, and maybe filing the back of the input pinion down to make it fit perfectly. The screws to hold the gears to the left and right half-axles are not countersunk like the original nylon gears. This makes the screw heads sit proud of the gear, but there is still enough clearance that they do not touch the pins that the spider gears turn on.

    Jun 10,2018

  • Jan
    zebatki
    They look very done, unfortunately, yesterday I refurbished the decks on the plastic cladding so they will wait for the next failure.

    Wyglądają na wykonane bardzo startannie, niestety wczoraj wyremontowałem dyfry na platikowych zebatkach więc te poczekają na montarz do następnej awarii.
    Vorschlag
    Jak na razie nie widzę wad, zastanawiam sie tyko co kolejne urwie sie po wzmocnieniu mostow...

    Jun 15,2018

  • scanikwwo
    Metal gears for differential WLTOYS 12428
    Ordered one set to make my WLToys more reliable, as the motor can shred the plastic ones quite easily. These are made of good quality metal but need some run-in when installed as they mesh up really tight. I used some graphite grease for about 30 minutes of running and they are more quiet and meshed up properly atm.

    Dec 03,2018

  • Durandal
    Nice quality and looks durable, but doesn't quite fit...
    Looks solid and durable, I would say that it is some kind of sintered steel.
    It is much harder than some zinc gears on some similar RCs, and much much tougher than stock weak plastic gears.
    Been on a few drives, seems durable and tough, for now.
    Vorschlag
    The problem is, although it seems identical to plastic gears by dimension, it is slightly too big and rigid, so the mesh is way too tight, needs modifying.
    The mesh is worst on pinion/ring gear. Pinion back side needs grinding off at least half a mm.
    Sun and pinion gears need some chamfering and a slight diameter reduction. In one case , it was also needed to remove metal shim betweeen ring gear and one sun gear.
    Ring gears also had some teeth partially damaged, probably in manufacturing.

    Jul 26,2018

Kundenfragen & Antworten

  • Alle
  • Produktinformationen
  • Lagerbestand
  • Zahlung
  • Über den Versand
  • Anderer Grund

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

Seien Sie der ERSTE Fragensteller. Möchten Sie GB-Punkte? Schreiben Sie einfach eine Rezension!

0 Fragen & Beantwortungen Alle ansehen

Empfehlung ähnlicher Produkte wie dieses

Ihre zuletzt angesehenen Artikel

Persönliche Empfehlungen einsehen

Neuer Kunde? Hier starten
Vorverkauf Service